NE Archives

Your bike’s saddle has one job: to keep your butt in place while you ride. This is a pretty important task, but it’s one the saddle can handle pretty easily. All it has to do is stay where you put it and not move. But what if your bike saddle likes to move around while you’re riding? It tilts, slides forward or backward, moves up and down, side to side...everything but stay put! What could be causing it to do so, and how can you fix it? Your bike saddle may be moving for a variety of reasons, most commonly loose bolts, seat clamps or seat rails. The problem could also be with the seatpost itself: the seatpost clamp could be loose, or if you have a dropper post, it could be loose or need higher air pressure for your weight. Fortunately, most of these issues require very simple solutions to correct. So let’s first identify the root cause of the problem and then cover how to fix it so you can get back to riding without worrying about your seat falling out from under you! 1. Bike Seat Tilts Forward or Backward Causes If your bike saddle is tilted at an uncomfortable angle, this isn’t a problem with the saddle itself; it just means it isn’t adjusted properly for your body. The saddle angle is meant to be adjustable to suit different riders, so you just need to dial in the angle that is most comfortable for you. While most riders will find a neutral position most comfortable, tilting the saddle forward or back can help shift your body weight forward or back respectively, and this could clear up certain pain points. Experience low back pain while riding? Try pointing the saddle nose down a bit to alleviate pressure on your lumbar vertebrae. Get excessively sore hands and feet? Point the nose up to shift your weight back slightly and take some of the strain off those fingers and toes. Experiment with different angles to find what works best for you. Now if the saddle tilts as you’re sitting on it, that’s definitely not supposed to happen! That’s something we want to address. Fixes To adjust the saddle angle, loosen the bolts clamping the saddle to the seatpost. Then, adjust your saddle to the desired angle and retighten the bolts evenly. Check out the video below for a quick visual guide to doing this: https://www.youtube.com/watch?v=wXSAMO0C-K8 If your saddle isn’t staying where you want it, it could be that the seatpost clamp bolts are loose. Apply a little bit of thread lock to each bolt and retighten. Check to see if the bolts are stripped or the threads are damaged, and replace if necessary. This should correct the issue. 2. Bike Seat Moves Side to Side Causes If your saddle wiggles or rotates side to side, the saddle rails may be loose. It will be easy to tell if this is the problem. Remove the saddle, hold it by the rails, and try to wiggle it. If it moves (it shouldn’t), there’s your problem! However, it may not be an issue with the saddle at all. The problem could stem from the seatpost. If you have a dropper post on your bike, a little bit of lateral play (1-2mm) is completely normal, but any more than that and you want to address it. Fixes First off, saddle rails should not move at all. This is potentially dangerous and could lead to the saddle coming apart while you’re riding. If the rails are moving, there’s really no way to repair it. You’re going to want to replace the saddle instead. If the saddle rails are firm, check to make sure the seat clamps are tight. This will correct the issue, though if the clamps aren’t tight, the saddle will be moving in all sorts of directions, not just side to side. So this may solve all of your problems. Still seeing lateral movement? Let’s check the seatpost. You definitely want to check the seatpost clamp to ensure it is properly tightened. This will help correct a non-dropper post. If you have a dropper post that moves more than 1-2mm, you’ll need to get it professionally serviced, because this is indicative of more problematic internal issues. 3. Bike Seat Keeps Slipping Down Cause If your saddle won’t stay at the height you want, the saddle isn’t the problem: once again, it’s the seatpost. Whether you have a dropper post or not, the seatpost isn’t staying put, and that’s no good. The last thing you want is for your seatpost to drop down when you least expect it! Fixes There may be one main cause, but there are a few things that could be going wrong to make your seatpost sink during your ride. Let’s start with a non-dropper post. Check the seatpost clamp to ensure it is tightened properly. The seatpost may feel solid when you’re checking it by hand, but now add all your body weight on top of it and it may not be as tight as you thought! Tighten that loose clamp bolt or quick-release to the torque specification listed and you’re good to go. If you have a dropper post, there are two additional factors that could be at play. First, start with the remote lever mounted on your handlebars. Ensure the lever locks into place when disengaged. If the lever won’t lock out, the seatpost will be able to move down when you put your weight on it. Second, if the lever does lock out but the seatpost stil slips down, it may not be pressurized enough for your weight. Dropper post air pressure can be adjusted just like your suspension. Road and mountain bikers tend to be a lighter bunch, so if you’re a heavier rider (like me at 200lbs), a stock dropper post may be a little soft for your weight. You can find detailed solutions to these and any other dropper post issues in my previous article, How to Fix a Dropper Post (When it’s Sinking, Stuck, or Wiggly). 4. Bike Seat Slides Forward or Backward Cause A bike saddle sliding front to back is probably the most common issue you’ll experience. Your saddle is meant to slide along its rails, so you can place it just where you need it to achieve a comfortable riding position. But just like a tilting saddle, once you have it in place...it should stay there! Fix A very common issue has a very simple solution. If your saddle slides forward or backward, the seat clamp is not tight enough. Tighten the bolts to make sure they hold the saddle in place. And again, add some thread lock, check for stripped bolts or damaged threads and replace if necessary. If It Moves but It Shouldn’t... Bike saddles come in all shapes and sizes and with many different features to accommodate a wide range of riders, but the one thing they all have in common is they only work if they stay where they’re supposed to. A properly adjusted saddle will make a huge improvement in your riding performance, but especially your comfort. The more comfortable you are, the longer you can ride. The more time you spend on your bike, the less time you spend doing things you don’t like...and this will make you happier, guaranteed! So use this article to figure out why your saddle isn’t staying put, then fix it and get back out on your favorite trails so you can avoid all those adult responsibilities like the rest of us.